Analysis of the Working Principle of Band Sawing Machine

Unlike a wheeled band saw, the track is supported on the ground by a wound endless track. The track contacts the ground, the shank is inserted into the soil, and the driver is not grounded. The track contacts the ground, the shank is inserted into the soil, and the driver is not grounded. The drive wheel continuously rolls the track from the rear by the engagement between the teeth on the drive wheel and the track pin on the drive wheel. The drive wheel continuously rolls the track from the rear by the engagement between the teeth on the drive wheel and the track pin on the drive wheel. 

The grounding part of the track gives the ground a rearward force, and the corresponding reaction force PK is also required to be given to the track. This PK reaction is the driving force for pushing the band sawing machine forward. The grounding part of the track gives the ground a rearward force, and the corresponding reaction force PK is also required to be given to the track. This PK reaction is the driving force for pushing the band sawing machine forward. The driving force of the wheel band sawing machine is directly transmitted to the walking wheel. Unlike the track band sawing machine, the driving force PK is transmitted to the axle of the driving wheel through the crawler wound on the driving wheel, and then the axle is passed through the band sawing machine. 

The body is passed to the drive wheel. The driving force of the wheel band sawing machine is directly transmitted to the walking wheel. Unlike the track band sawing machine, the driving force PK is transmitted to the axle of the driving wheel through the crawler wound on the driving wheel, and then the axle is passed through the band sawing machine. The body is passed to the drive wheel. When the driving force is sufficient to overcome the rolling resistance and the traction resistance of the farm implement, the roller is rolled forward on the upper surface of the crawler, thereby causing the band saw to travel forward. When the driving force is sufficient to overcome the rolling resistance and the traction resistance of the farm implement, the roller is rolled forward on the upper surface of the crawler, thereby causing the band saw to travel forward. Since the drive wheel continuously rolls the track section forward and then lays it on the ground via the guide wheel, the roller can continuously roll on the track laid with the track. Since the drive wheel continuously rolls the track section forward and then lays it on the ground via the guide wheel, the roller can continuously roll on the track laid with the track. It can be seen that the crawler band sawing machine is realized by the interaction between the crawler belt and the ground by the driving torque through the driving wheel, and the driving force is greater than the sum of the rolling resistance and the traction resistance. It can be seen that the crawler band sawing machine is realized by the interaction between the crawler belt and the ground by the driving torque through the driving wheel, and the driving force is greater than the sum of the rolling resistance and the traction resistance.

The maximum driving force is the same as that of a wheeled band saw, which depends on the ability of the internal combustion engine on the one hand and the attachment conditions between the track and the ground on the other hand. The maximum driving force is the same as that of a wheeled band saw, which depends on the ability of the internal combustion engine on the one hand and the attachment conditions between the track and the ground on the other hand. In general, the greater the power of the band saw, the greater the driving force. In general, the greater the power of the band saw, the greater the driving force. There are many factors affecting the adhesion. In terms of the structure of the band saw itself, the reasonable selection of the shape and size of the spurs and the crawler belt, and the increase of the weight of the crawler belt within a certain limit can improve the adhesion and increase the traction of the band sawing machine. . There are many factors affecting the adhesion. In terms of the structure of the band saw itself, the reasonable selection of the shape and size of the spurs and the crawler belt, and the increase of the weight of the crawler belt within a certain limit can improve the adhesion and increase the traction of the band sawing machine. .

The rolling resistance of the track band sawing machine is formed by the deformation of the soil in the vertical direction and the mutual friction between the parts of the walking system, which reduces the rolling resistance and increases the traction of the band sawing machine. The rolling resistance of the track band sawing machine is formed by the deformation of the soil in the vertical direction and the mutual friction between the parts of the walking system, which reduces the rolling resistance and increases the traction of the band sawing machine.

The steering of the track band sawing machine is achieved by pulling the steering clutch on one side and simultaneously pressing the brake in the same direction to brake the track on one side and the track on the other side. The steering of the track band sawing machine is achieved by pulling the steering clutch on one side and simultaneously pressing the brake in the same direction to brake the track on one side and the track on the other side.

Modern track-type band saws also have different speeds for steering through two tracks. Modern track-type band saws also have different speeds for steering through two tracks.